OAKSHOTT BLOG HOP AND A ‘MOUNTAINS FROM A MOLE HILL’ QUILT

Welcome new visitors and old!  How exciting that you’re all here to join me on my stop of the Oakshott Scandinavia Blog Hop!  The perfectly curated bundle of eight new shot cottons from Oakshott had the same effect on me as the Autumn bundle from last year.  There’s something about a folded pile of fabric that gets the brain cogs turning, and this time was no exception.

The collection draws inspiration from an airy colour palette and clean Scandinavian interiors.  A milky white warp combines with 8 different weft tones to create a collection that is unassuming, yet full of depth.  In all the past projects in which I have used Oakshott fabrics, none have caught the light in different ways so much as these colours. They really are amazing to work with and only an up-close-and-personal look will do them justice.  Hopefully, once you get to the end of this post you’ll all be inspired to go and get some!

Whilst I was waiting for my bundle to arrive, I began to brainstorm some ideas I thought might work for these, the subtlest fabrics I’ve used to date.  Much like the fabrics themselves, I wanted to take inspiration from Scandinavia and began looking at Danish and Swedish art, design and architecture.  Several ideas began taking shape, each more elaborate than the last, until my mind was overflowing with creative thoughts.  I was making things too complicated! I went back to the drawing board and the fabrics themselves.  They were crying out for something simple.  Then, probably through a combination of my teaching a HST class at the time and the fact that my creativity was getting out of control, I happened upon the idea I eventually ran with.  A quilt, inspired by Scandinavian landscapes and the idea of making something out of nothing or, more specifically, mountains from mole hills!

With simplicity being the key, I settled on HSTs with the odd quarter circle thrown in for good measure.  My original design saw a lot more quarter circles topping the ends of the ‘pillars’, but after some thought I decided that the quilt would be more impactful if the ‘mountains’ sprung from just one ‘mole hill’.  I used my trusty Sizzix Big Shot to cut the drunkards path pieces (which I did before revising my idea, so don’t be surprised to see a Oakshott mini quilt in the not too distant future) and used new dies, the 4.5″ (659838) and 5″ (657626) square to cut the pieces for the rest of the quilt.  My preferred method for making HSTs is to place 2 over-sized squares together and sew either side of the diagonal line using a scant quarter-inch seam allowance, making 2 at once. I then trim the units down and find this method to give me better accuracy when it comes to joining the blocks.  If you have a Sizzix machine, then the process can be sped up by using the HST die.

In terms of piecing, this is a really simple quilt to make.  A little fore-thought is needed to cut and pair up the fabrics so that the pattern forms correctly.  There are many great online tutorials for both HST and quarter circles, so I won’t cover old ground here.  If you’d like to make your own ‘Mountains From A Mole Hill’ quilt, then use the follow cutting list.  Once you’ve cut and pieced all the required squares, HSTs and quarter circles, use the photograph as a guide to piece them, the squares and the quarter circle units into rows before sewing the rows together to complete the quilt top, which finishes at 48″ square.  When joining the blocks, be sure to alternate the direction in which you press the seams in each row, i.e, press all the seam in row 1 to the left, all the seam in row 2 to the right, all the seams in row 3 to the left, etc.  Doing so will enable you to nest and better match the seams when it comes to sewing the rows together.

Materials:

1 FQ bundle of Oakshott Scandinavia as well as an additional half yard of Bergen (cream), Uppsala (light grey) and Stockholm (dark grey).  You will have some fabric left over, but that’s never a bad thing!

Cut the following:

Cream           17 4.5″ squares and 7 5″ squares

Light Grey     24 4.5″ squares and 13 5″ squares

Dark Grey     28 4.5″ squares and 14 5″ squares

Green           7 4.5″ squares and 6 5″ squares

Yellow           9 4.5″ squares and 4 5″ squares

Blue              6 4.5″ squares and 4 5″ squares

Pink              3 4.5″ squares and 3 5″ squares

Purples         5 4.5″ squares and 3 5″ squares.

Use the 5″ squares to make the following number of HST.  Due to the method of making a pair at once, you’ll have some left over, which you can piece into the back or use in another project.

11 light grey and dark grey

10 cream and light grey

4 dark grey and yellow

3 dark grey and green

2 dark grey and blue

2 dark grey and purple

2 pink and purple

1 cream and dark grey

1 cream and green

1 light grey and green

1 light grey and blue

1 dark grey and pink

1 yellow and blue

1 yellow and green

1 purple and blue

1 green and pink

Cut 2 quarter circles in green, an arch in yellow and an arch in purple.  What ever method you use to cut your drunkard’s path pieces, ensure they finish at the same size as the squares and HST units, i.e 4.5″.

As you can see, my quilt isn’t quite finished.  I was all ready to quilt this using wavy, edge-to-edge lines but a spark of inspiration at the 11th hour had me reaching for paper on which I scribbled furiously.  I’m not sure if my idea may be a tad ambitious.  If so, I apologise for making you wait to see this quilt finished; I just thought that the idea was worth a little more pondering.  So watch this space…it may fail miserable and I’ll end up using my original quilting plan!  In any case, I’m glad I get to enjoy the simplicity of the pieced top for a little while longer.

This fabric really is amazingly versatile.  Be sure to check out all the stops on the Oakshott Scandinavia Blog Hop. Eight projects from eight different bloggers.  You can find links to all the stops below.  Thank you all for visiting, and to Lynne and Michael for allowing me to indulge my creativity.

 4th  May – Sarah Sharp
 5th  May – Heather Scrimnscher 
 6th  May – Amy Sinibaldi
 7th  May – Rossie Hutchinson
11th May – Elaine Poplin
12th May – Sarah Fielke
13th May – Nicholas Ball
14th May – Lori Landerberger

Advertisements

DESIGNING AND DIE CUTTING

The attic has been a flurry of activity lately, something which excites me so much that I sometimes forget to slow down and share it with you all here.  There hasn’t been much sewing as such, but rather preparation for it.  By that I mean I’ve been scribbling down lots of designs, gathering inspiration from all over the place and preparing fabrics, including lots of cutting!

Thank goodness then for my Sizzix Big Shot!  One thing I’m working on at the moment is a quilt for an upcoming blog hop featuring the new Scandinavia collection by Oakshott.  Now, as anyone who’s sewn with Oakshott fabrics before knows, they are a dream to work with, and I always like to take a little extra time to plan whenever I use them exclusively in a quilt.  I can’t share too many details with you now, you’ll just have to come back for the blog hop for those, but what I can say is there are lots of squares, half square triangles and, a first for me, a drunkard’s path block or two. This is uncharted territory and something that makes my inner perfectionist cringe a little.  Those curves will have to be pieced pretty bang on if that nagging voice inside my head is to be silenced. Despite the block’s name, I’m not sure a drop of bourbon would do anything to help either.  Best I stick to fueling up on coffee!

I intend to do a trail run with some questionable fabric before I dive in with the Oakshott, but I’ve already taken the first step towards achieving precise blocks by using the Bigz dies to cut out my pieces. My theory is that if they’re all cut out the same then they should all fit together easily.  That makes sense, right?  I’m using the Drunkard’s Path Arch and Fan die (659849) and the Drunkard’s Path Quarter Circle die (659850).  As well as accurate, the dies are a great time saver too, giving me more time to focus on the sewing!  Wish me luck!  If you have any tips for sewing the 2 parts of the block together, preferably without using a load of pins, comment away!

A SECOND HALF SQUARE TRIANGLE QUILT

It’s officially October, my favorite month, and this latest finish is woefully late.  You see, back in June a work colleague and his wife brought home their newborn son.  Another colleague and I decided it would be a nice gesture to make a baby quilt for them. We had a collection and went shopping.  My friend is a student of fashion design and has similar tastes to me when it comes to fabrics.  We like the same colours and designs so the whole process was blissfully easy.  It’s not the first time we’ve collaborated on a project, having made a graduation quilt a few years earlier, and it was fun to teach her some new things, like half square triangles.

We chose a simple chevron layout, alternating the rows between light and dark fabrics.  We knew the sex of the baby before we pulled fabric, but wanted to stay away from the traditional blue palette, instead opting for something a bit more modern.  We chose low volume prints, including some Botanics by Carolyn Friedlander, paired with mustards and blacks.  We used a variety of fabrics including some Robert Kauffman Essex linen and some double gauze.  This was my first time sewing with some Cotton and Steel basics.  They are so much nicer in person!  Some might think black an unusual choice for a baby quilt, but we were both sold and really like the bold statement it makes.  We pieced the top together in a day before I took it home to finish.

With a simple layout we opted for some equally simple quilting, wavy lines across the entire quilt top.  The quilting was a joy to do and I really dig the texture this type gives.  The backing was some Ikea Britten print that I had in my stash, whilst the solid black  binding continues the simple feel of the quilt.  This was the first time I’ve cut my binding strips two inches wide.  I really like the look of a skinny binding and I think this works better than my usual two and a quarter-inch strips.  The quilt finishes at 37″ square.

We’re both really pleased with how this one turned out and can’t wait to gift it, even if it is a little late!